About This

• SEE WHEN TO CHANGE THE CARTRIDGE - The clear Styrene-Acrylonitrile (SAN) sump lets you examine flow, cartridge life, and performance at a glance, so you replace the filter cartridge right when it is needed instead of guessing
• FITS A WIDE RANGE OF 10-INCH CARTRIDGES - Accommodates standard 2-1/2" to 2-7/8" diameter cartridges in the 10-inch (#10) length, with 3/4" NPT inlet and outlet ports for sediment, carbon, and other drop-in filters
• NSF AND ANSI 42 CERTIFIED BUILD - Tested and certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity, with a reinforced polypropylene cap, EPDM O-ring, and a 300 Series stainless steel button assembly
• PRESSURE RELIEF FOR EASY SERVICE - A pressure-relief button on the inlet side of the cap bleeds pressure for easier cartridge changes; rated to 125 psi (8.6 bar) and 40 to 125 degrees F (4.4 to 51.7 degrees C), with a low 1 psi drop at 10 gpm
• WRENCH AND BRACKET SOLD SEPARATELY - This housing does not include the SW-2 wrench or the MC-1A mounting bracket kit; for a leak-free seal hand-tighten the sump then add a quarter to half turn, and use thread sealant tape on the threaded port connections

Overview

• Material : Polypropylene (PP)
• Product Dimensions : 5.27"D x 12.5"W x 5.27"H
• Item Weight : 2.8 Pounds
• External Testing Certification : NSF, ANSI
• Product Benefits : Removes Impurities