Shipping takes place within 3-5 business days. If there is a problem with the shipment of the product, we will notify you via the email address you entered when ordering.
1
/
of
5
ANOTHERAMAZINGPRODUCTUSA
Glass Cutter for Thick Glass – Built-in Breaker, No Tap - Tap and Hope It Works, 2-in-1 Cutting Tool for Repairing Windows and Picture Frames, Incl. Oil, Step-by-Step Instructions and Online Videos
Glass Cutter for Thick Glass – Built-in Breaker, No Tap - Tap and Hope It Works, 2-in-1 Cutting Tool for Repairing Windows and Picture Frames, Incl. Oil, Step-by-Step Instructions and Online Videos
Regular price
$68.33 USD
Regular price
$68.33 USD
Sale price
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
About This
- GLASS CUTTER FOR THICK GLASS - Watch Glass Cutting Tool Videos & Read 50 Yrs of Tips And Instructions. Replaceable Carbide Wheel Should You Ever Wear it Out. Flat Side Will Run Against Straight Edge. Must Soak Glass Cutter Tool Wheel in Oil, Score Up And Down Board To Make Sure Wheel Spinning Freely. If Glass Scoring Blade Dry or Drags It Will Not Break Clean. Glass Cutters Tool Wheel Must Be Oiled Every Cut, Practice On Scrap Glass Sheet Before Making Final Cut To Check You Have Technique Down.
- HOLD GLASS CUTTING TOOL – Handles Of Glass Cutter Tool Are Only For Squeezing Glass To Break, Do Not Hold Glass Cutter by Handles When Scoring. Hold Close To The Wheel for Control And Pressure on Glass Scorer. The Technique is to Create A Small V In Surface Of Glass Sheet. Scoring Way Too Hard Or Without Oiling Wheel Leaves A Wide Groove And White Dusty Line that Will Not Break On The Line Instead Of A Shallow V, The Perfect Glass Score Must Be Just Firm Enough To Leave the V Score in Glass.
- CUT STRAIGHT LINE IN GLASS – Place Glass Sheet On A Board At Waist Height, Scoring Glass on A Soft Carpet, Scoring Too Hard or More Than Once Will Cause Glass To Shatter When You Go to Break Glass. Draw A Line On Glass With A Marker, Follow Line By Pulling Cutter Towards You, Never Push Away, Watch The Back Of The Glass Cutter Wheel to Keep on Line or Use Flat Side Of Glass Cutting Wheel To Run Along A Very Smooth Straight Edge Guide At Least 2mm Thick, Guide Can Be Taped Down To Prevent Moving.
- BREAKING GLASS – Place Running Pliers Breaker Of Glass Cutter Dead Center Over Score Line, Lift Glass And Squeeze Handles Ever So Gently. Over Squeezing Can Chip Edges Of Glass. Large Glass Sheet Use Piece Of Wood Under The Score Line And Bend Glass Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Glass Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edge, Less May Be Possible Off Edge With Practice.
- CUTTING GLASS TILE – Glass Mosaic Tile On A Sheet Are Difficult To Cut With A Wet Saw It Chips Edges, The Glass Cutters Tool Is The Best Glass Tile Cutter It Cuts Cleaner Than Any Other Glass Tile Cutting Tool. Sheet Can Be Scored In One But Glass Tiles Must Be Split 1 At A Time, All Glass Tiles Are Different, Practice With Glass Cutter, Start Scoring Firm Pressure, Gradually Lighten It To Get To A Stage Where You Are Scoring Just Firm Enough To Score Glass But Hard Enough The Glass Tile Breaks.
Share
