About This

• MIRROR CUTTER KIT- Watch Mirror Cutting Videos Read Tips And Instructions and Download User Guide. Must Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down Board To Check Wheel Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Stops It Will Not Score. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Stick and Drag Across, That Will Not Make a Good Score. Practice On Scrap Glass Before Making Final Cut To Ensure You Have The Technique Down.
• HOLD MIRROR CUTTING TOOL – Handles Of Mirror Cutter Tool Are Only For Squeezing Mirror To Break Do Not Hold Glass Cutter by Handles When Scoring. Hold Close To The Wheel for Control And Pressure on Mirror Scorer, The Technique is to Create A Small V In Surface Of The Mirror. Scoring Too Deep Or Without Oil Will Leave A Wide Groove And White Dusty Line that Will Not Break On The Line Instead Of A Shallow V, Perfect Mirror Score Must Be Just Firm Enough To Leave the V Score in The Glass Mirror.
• BREAKING MIRROR - Align Aluminum Breaker Of Glass Cutter Dead Center Over Score Line, Lift Mirror And Squeeze Handles Ever So Gently. Over Squeezing Can Chip Edges Of Mirror. Large Mirror Sheet Use Piece Of Wood Under The Score Line And Bend Mirror Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Mirror Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edge, Less May Be Possible Off Edge With Practice.
• GLASS DRILL BIT – 3/16” ¼” ½” Drill Bit For Glass Drill Bit For Bottles, These Glass Cutting Drill Bits For Drilling Holes In Glass Are To Be Used Wet, Glass Drilling Bits Will Also Drill Holes In Porcelain Tile So Not Just Drill Bits For Glass Sheet Also A Drill Bit For Glass Bottles And Drilling Holes In Glass Blocks For Making Wine Bottle Lamps And Lights. The ½” Glass Drill Bit is the Perfect size for Tree Lights to Push Through. On Flat Surfaces the Guides can be used To Hold Bits Straight
• TILE DRILL BITS – 3/16 Tile Drill Bit ¼ Tile Drill Bit Spear Point Tile and Glass Drill Bits Can Be Used For Drilling Holes In Glass At Low Speed In A Drill Press Is Best. Drill Holes In Clay Pots Drill Holes For Drainage in Pots Drill Holes In China Plates And Cups. Build A Wall Around Area With Plumbers Putty Fill With Water To Create A Well Of Coolant. These Tungsten Pointed Tile Drill Bits can be used for Drilling Holes in Ceramic Tiles For Screw Holes for Grab Bars and Shower Doors.

Overview

• Material : Tungsten Carbide
• Finish Type : Uncoated
• Shank Type : Straight
• Brand : The Amazing Tile And Glass Cutter
• Item dimensions L x W x H : 10 x 7 x 1.5 inches