About This

• 1. 【Premium Build: Spring Steel + Upgraded PEI + Imported Film】： The spring steel core offers exceptional flatness and durability. The green side features an upgraded PEI powder formula that provides stronger adhesion and an ultra fine matte finish – much smoother than ordinary PEI spray coatings. The black side uses 100% imported PEI film for a bubble free, perfectly flat, smooth glossy finish.
• 2. 【Dual Sided for Different Printing Scenarios】： Green cold plate supports low temp printing: PLA at just 30 50°C, PETG 50 70°C, ABS 70 90°C – saving energy and reducing warping. Black PEI film side gives you a smooth glossy bottom: PLA 55 70°C and quality PETG ≤70°C (do not exceed 70°C). Neither side works with TPU, PC, nylon, or high temp engineering filaments.
• 3. 【Cold Plate That Delivers: Ultra Smooth, Strong Grip & Energy Savings】： Prints stick like a magnet even at low temperatures (PLA from 30°C) – no glue, no tape, no warping. The surface is incredibly smooth with no “orange peel” texture, so your first layer looks clean, flat, and professional. Cuts bed heating energy by up to 40% compared to ordinary PEI plates. For complex PETG on the black PEI side, add a brim/raft, use glue stick if needed, and slow first layer speed to 10 15 mm/s. Never exceed 70°C bed temp on that side.
• 4. 【Easy Release, Cleaning & Nozzle Warning – How to Use】： Quick steps: Peel off protective film (black side only). Place plate on your heated bed. Level bed so the nozzle is one A4 paper thickness away. Print. After printing, let cool, then bend the plate – the print pops off. No scraping. Clean with mild dish soap and a soft cloth. Never use alcohol, acetone, or strong acids/alkalis – they will damage the coating or film. Avoid metal tools on the green side. Warning: A nozzle at 190 220°C that touches the plate will cause irreversible heat damage (not covered by warranty).
• 5. 【Size, Compatibility & Returns】： Size: 184x184mm, Compatible with Bambu lab a1 mini 3D printer. We offer 30 day free returns. Contact us within 24 hours for any issues.