About This

• 1.【 One plate, two surfaces – mature engineering for all filaments】：a.Gold spray side-- Proprietary PEI powder coating (stronger adhesion, finer texture), stainless steel core (faster heating, higher flex resistance). Supports PLA, PETG, ABS, TPU, PC, nylon – up to 300°C. b.Black PEI film side-- 100% imported PEI film with upgraded 3M adhesive (no bubbling, no lifting). Smooth flat finish, mirror-like bottom for PLA/PETG. One plate, two surfaces – mature and reliable.
• 2.【 Gold spray side – market-proven, beginner-friendly, great value】： Market-proven for years – stable, easy to use. Our proprietary PEI powder delivers far stronger adhesion than ordinary sprays – even beginners succeed easily. PLA can be printed at 50-55°C (vs 60-70°C), PETG 5-10°C lower – save energy, reduce warping. Supports high-temp engineering filaments like ABS, TPU, PC, nylon. Easy cleaning – use alcohol or mild dish soap, won't damage coating. One plate replaces multiple plates – unbeatable value.
• 3.【 Black PEI film side – upgraded 3M adhesive + imported film, bubble-free】： Ordinary PEI film often suffers from bubbling, lifting, scratches. We use 100% imported PEI film + upgraded 3M adhesive – completely bubble-free, perfectly flat. Prints PLA (55-70°C), PETG (≤70°C) with a smooth, glossy bottom – no orange peel, no sanding. Removal: cool → bend → pop, plastic scraper allowed. Alcohol-safe, easy clean. Peel off protective film before first use.
• 4.【 Stainless steel core + high‑temp filament printing guide】： We use stainless steel (not cheap manganese/spring steel) – uniform heating, faster warm‑up, higher flex resistance, long‑term flatness. 0.5mm balances rigidity and flexibility.⚠️ For ABS / TPU / PC / nylon:1.Add brim/raft to increase contact area;2.Slow first layer speed (e.g., 10‑15 mm/s);3.Use glue stick if needed (water‑soluble);4.Keep ABS at 70‑90°C (do not lower),Follow these tips for stable, warp‑free results.
• 5.【 Fits Creality K2 & how to use】：Size: 270x293mm – perfect fit for Creality K2.Steps: ① Place plate on heated bed. ② Select correct mode (High‑Temp/Textured PEI for gold side; Smooth PEI for black side). ③ Level bed – nozzle at one A4 paper thickness (too low = permanent scratch). ④ Set temperature accordingly (gold side up to 300°C, black side ≤70°C). ⑤ Print → Cool → Bend → Pop. ⑥ Clean either side with 70%+ alcohol or mild dish soap, dry.[Bottom line]: Mature product, self‑developed core, solid materials, beginner‑friendly, great value. Upgrade your printing today.